Last Modified: 11-29-2007 1.6 A
Service Category: Suspension Section: Suspension Control System
Model Year: 2008 Model: Sequoia Doc ID: RM000001NKX002X
Title: SUSPENSION CONTROL: HEIGHT CONTROL COMPRESSOR: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE REAR BUMPER COVER

EXTERIOR PANELS / TRIM: REAR BUMPER: REMOVAL (2008 Sequoia)

2. REMOVE HEIGHT CONTROL NO. 1 COMPRESSOR

(a) Remove the 3 clips and compressor cover.

(b) Disconnect the hose.

(c) Disconnect the 2 wire harness connectors.

(d) Disconnect the height control tube SUSPENSION CONTROL: SUSPENSION CONTROL SYSTEM: PRECAUTION (2008 Sequoia) .

(e) Remove the 3 bolts and height control compressor.

3. REMOVE HEIGHT CONTROL FILTER

(a) Disconnect the 2 hoses.

(b) Remove the 2 bolts and the height control filter.

4. REMOVE HEIGHT CONTROL COMPRESSOR BRACKET

(a) Disconnect the 3 wire harness clamps.

(b) Remove the 3 bolts and the bracket from the height control compressor.